This page covers the frequently asked questions about camera sensor and CSI
Q: Is the camera sensor <insert_sensor_name_here> supported by your firmware?
A: Our default firmware currently only supports the Raspberry PI IMX219. If you need further support with a different camera, you may want to contact us (support@auvidea.eu)
Q: My custom camera does not work on your board?
A: You may want to contact your camera vendor, if he already supports our carrierboard with their camera. If not, you may want to contact us (support@auvidea.eu)
Q: Why doesn't my IMX219 sensor on your Carrierboard?
A: Its required to install a custom firmware on the Jetson to support our carrierboards properly. You can find the downloads for our image on our website
Q: I have installed your firmware, but my IMX219 sensor still does not work.
A: Please make sure that you have connected the camera properly to your carrierboard. You may want to reach out to us, If the camera still does not work (support@auvidea.eu)
Q: How is the CSI-Connector configured on your carrierboard?
A: You can find a more detailed description of the CSI-Connectors in the manual on our website of your carrierboard