Providing technical information and documentation to the product line JNX30D for NVIDIA Jetson Nano & TX2 NX & Xavier NX
70887
Auvidea can take no responsibility for the accuracy or completeness of any information presented in an exported PDF document as the export feature is developed, managed and maintained by GitBook. Those export mechanisms are subject to change without interaction by Auvidea. Please note that Auvidea includes this version table to identify the document and reference changes.
This new JNX30D carrier board has been designed for the Jetson Xavier NX primarily, it is designed to be an improved version of the NVIDIA Devkit.
Easy integration into passively cooled systems
High performance storage: M.2 NVMe PCIe x4
Flexible design and manufacturing
designed and manufactured in Germany
in-house fully automated production line with 3D AOI
special configuration possible with minimum purchase quantity (display port, M.2, POE, 48V power in, super cap option, 2 RPi camera module connectors, SPI, I2C, switches, etc.)
Added Appendix D & E
1.6
Ported Manual to Gitbook
yes
yes
Fan connector
yes
yes
M.2 NVME Key M
yes
yes
Micro SD card
yes
no
M.2 Key E
only with external module
(using internal USB - J8)
yes
CAN RX / TX
yes
yes
USB 3.0
1x USB 3.1
(native - full performance)
4x USB 3.1
(via USB hub - shared)
Micro USB
1x Micro USB
(host and device mode)
1x Micro USB
(device mode only)
Auto Flashing
yes
(plug in host cable and flash)
no
USB 2.0
1x USB 2.0 (JST-GH, J8)
no
Ethernet
Gigabit RJ45 (one LED)
Gigabit RJ45 (2 LEDs)
PoE option
yes - P11
yes
CSI
2x CSI-2 (4 lanes) plus camera LED
(hardware sync available)
2x CSI-2
UART
2x (J14 and 40 pin GPIO header)
2x (40 pin header)
I2C
2x (40 pin header)
2x (40 pin header)
I2S
1x (40 pin header)
(5V tolerant, unidirectional)
1x (40 pin header)
SPI
2x (40 pin header)
(5V tolerant, unidirectional)
2x (40 pin header)
GPIO
3x in + 3x out (40 pin header)
(5V tolerant, unidirectional)
6x bi dir (40 pin header)
Protection
overvoltage protection (TVS diode)
?
Level shifters
unidirectional level shifters (work better)
bi dir (can cause problems)
Humidity
non condensing
Longevity
No temperature sensitive components (like electrolytic capacitors)
design services: you architect your custom carrier board and Auvidea designs and produces it – please ask for a quote
Fully populated variants available
Add-on boards for more USB and Ethernet ports
Onboard IMU
Onboard EEPROM and crypto chip (for SW copy protection)
PCIe x1 connector
LM823 Wi-Fi module
2 more CSI-2 interfaces (2 lanes each)
RTC battery (rechargeable)
Over current fuse (product safety)
UPS option for graceful power down
On board MCU for watchdog and remote power cycle (LTE)
Standard version
1.0
Initial document, internal verification process
1.1
Internal verification process
1.2
Internal verification process
1.3
Internal verification process
1.4
Updated content and pictures
38486
Engineering prototype
38486-2
Production release
Power
6V - 19V (5.5/2.5mm connector)
5V – 19V
NX powering
5V 8A power supply
?
DP
no
yes
HDMI
standard HDMI connector (2.0)
USB 3.1
10Gb/s
Physical size
80x 104.6mm
Mounting holes
4x M3
Temperature range
0 to 70°C (extended range optional)
Carrier board logic
< 1 watt
3.3/5V power converter efficiency
> 90%
Power in converter efficiency
> 90%
1.5
HDMI
