The crypto chip can be used for authentication, software licensing and copy protection.
The crypto authentication chip is currently not supported. Support is planned for revision 3 of this product.
| Image | Note | |
|---|---|---|
Set FAN speed to the lowest value. Some FAN´s don't stop when speed is 0.
Set FAN speed to the highest value possible
command to read FAN tachometer. Value displays in rounds per minute.
(Depending on the FAN, this value may need to be scaled/converted)
Auvidea can provide custom enclosures for its carrier boards. These enclosures provide a passively cooled solution. This solution is designed for the AGX models. With a max power draw of 35W (normal mode) the enclosure temperature reaches 55 °C while in 24 °C room temperature which is a safe temperature for Human contact. The MaxN mode (up to 90W) is not recommended as the enclosure temperature increases above acceptable levels for direct human contact. It is also possible to apply your branding on the front and backplate of the Enclosure. Auvidea has in-house capabilities of laser and milling engraving.
Besides the branding options for the enclosure, it is also possible to customize the label field on the carrier board. Auvidea uses the label field to engrave a small QR code and serial number to track production processes. It is possible to add your custom engravings like logos, text or QR codes to this field as a laser engraver is used.
The standard carrier board configuration is designed to suit most use cases. Please see the Pinout description for customization examples like voltage configurations (3.3V or 1.8V).
We take pride in tailoring our products to your special need and are capable to adjust it in small production series. Please contact Auvidea with your special requests to work out a solution.
| Image | Note |
|---|---|
X221D + Fan
On the left you see a standard 80x80x15mm fan connected with the adapter cable to the J8 Fan connector.
Adapter cable
On the left you see a drawing of the adapter Kable and the pin description.
In the left image the label field is highlighted.
