Loading...
Loading...
Loading...
To be added
Overview of the product line JNX84
| Version | Changes |
|---|---|
Disclaimer PDF export Auvidea can take no responsibility for the accuracy or completeness of any information presented in an exported PDF document as the export feature is developed, managed and maintained by GitBook. Those export mechanisms are subject to change without interaction by Auvidea. Please note that Auvidea includes this version table to identify the document and reference changes.
| Version | Changes |
|---|---|
| SKU | Product |
|---|---|
38531-1
Engineering prototype
38531-2
Production release
70865-LC
JNX84-LC
70865-ULC
JNX84-ULC
70865-AI
JNX84-AI
1.0
Initial release
Detailed pinout description of all possible connectors a given board offers, please check the overview page what your specific carrier board is populated with.
Please see our GPIO-Guide to reference the socket pin to the correct GPIO number
Used connector: JST-GH 1.25mm
| Pin | Description | Socket Pin | Note |
|---|---|---|---|
Used connector: Wuerth 691325310012 3.81mm pin header.
| Pin | Description | Socket Pin | Note |
|---|---|---|---|
This connector is only populated on the JNX84-AI version.
Used connector: 60 pin extension port: DF12(5.0)-60DP-0.5V(86)
Used connector: JST-GH 1.25mm - AI version only
This connector is only populated on the JNX84-AI version.
| Pin | Description | Socket Pin | Note |
|---|---|---|---|
| Pin | Description | Socket Pin | Note |
|---|---|---|---|
1
GBE_MDI0_N
2
GBE_MDI3_N
3
GBE_MDI0_P
4
GBE_MDI3_P
5
GBE_MDI1_N
6
GBE_MDI2_N
7
GBE_MDI1_P
8
GBE_MDI2_P
9
GND
10
GND
11
I2S0_SDOUT
12
PEX_TX0_P
13
I2S0_SDIN
14
PEX_TX0_N
15
I2S0_LRLK
16
GND
17
I2S0_SCLK
18
PEX_CLK2_P
19
PEX_WAKE_L
20
PEX_CLK2_N
21
PEX_L1_CRQ
22
GND
23
PEX_L1_RST
24
PEX_RX0_N
25
12V
26
PEX_RX0_P
27
12V
28
GND
29
12V
30
USB3_RX2_P
31
BTN_PWR_ON
32
USB3_RX2_N
33
SYS-RST_IN
34
GND
35
12V
36
USB3_TX2_P
37
12V
38
USB3_TX2_N
39
12V
40
GND
41
FORCE-REC
42
USB1_D_P
43
POWER_EN
44
USB1_D_N
45
UART2_RXD_33
46
GND
47
3.3V
48
USB3-EN_p126
49
UART2_TXD_33
50
GPIO_05_p128
51
3.3V
52
USB2_D_P
53
1.8V
54
USB2_D_N
55
SHTDWN_REQ
56
GND
57
GEN1_I2C_SDA
58
UART0_RXD_33
UART2 of Jetson (console UART)
59
GEN1_I2C_SCL
60
UART0_TXD_33
UART2 of Jetson (console UART)
1
5V
2
UART0_TXD
1.8V level
3
UART0_RXD
1.8V level
4
UART0_RTS
1.8V level
5
UART0_CTS
1.8V level
6
GND
1
5V
2
UART2_TXD
236
3
UART2_RXD
238
4
CAN_TX
145
requires external CAN transceiver
5
CAN_RX
143
requires external CAN transceiver
6
GND
1
IN3
93
2
GND
3
IN2
216
4
GND
5
IN1
209
6
GND
7
COM3
8
NO3
212
relay
9
NO2
97
relay
10
COM2
11
NO1
207
relay
12
COM1
This compact carrier board has been developed for cost sensitive embedded headless applications. Cost has been reduced by eliminating interfaces like monitor output. The target market is security and surveillance applications. GPIO inputs and outputs support the interfacing to alarm systems.
The lowest cost version is reduced to the max as it only features a power input and Ethernet output. Other versions add interfaces like the GPIO connector, CSI-2, SD card and more. The NX versions integrate an enhanced power supply with 5V and up to 8A.
The JNX84 features an industrial strength design and is commercially deployable in any volume.
Standard 5.5/2.5mm power jack: 12V
Flashing via USB-C: USB-C to USB type A cable required (FR pins must be manually shorted)
LEDs: right – power, left – network activity
| Category | Item | Note |
|---|---|---|
Modules
- NVIDIA Jetson Nano - NVIDIA Jetson TX2 NX (JNX84-AI only)